NEWS

Check category

Is spring deformation the culprit of machine noise?

Is spring deformation the culprit of machine noise?

(Summary description)In the direction, the smaller deformation can withstand large loads and the axial space is compact. Compared with other types of springs, the deformation per unit volume is larger and has better shock absorption capacity. In particular

In the direction, the smaller deformation can withstand large loads and the axial space is compact. Compared with other types of springs, the deformation per unit volume is larger and has better shock absorption capacity. In particular, the combination of the use of the combination, due to the surface friction damping effect, the effect of absorbing shock and dissipating energy is more significant.

 

Due to various reasons such as machine wear, insufficient smooth oil, aging of the parts, and spring deformation, some abnormal vibrations and noises may occur. Failure to adjust or repair in time may result in accelerated wear and damage to machine parts of large laundry equipment.

 

Xiaobian tells you how to solve these laundry equipment noise problems:

 

1. When the large-scale laundry equipment is in the washing operation, especially during the high-release process, the inside of the fuselage makes a loud noise. This kind of problem is mostly caused by the collision between the inner cylinder of the large laundry equipment and the fuselage shell. This situation may be that the machine equipment is not placed flat enough, the time is long, the center of gravity of the machine is shifted, and the suspension damping system needs to be balanced. Adjustment.

 

2. When the large laundry equipment is running, the washing drum will give a clucking sound when it rotates. During the inspection, water can be injected but the clothes are not put inspected. At this time, if there is still a squeaking friction sound when the drum is running, it is caused by friction between the drum and the inner wall of the large laundry equipment, and may be the spindle bearing of the drum. Deviation after wear. If you continue to put in the clothes, the sound will be louder. In this case, the fault usually disappears after the spindle bearing is replaced.

 

3. When the large laundry equipment is running, the motor drives the belt to make a click. This is due to the long wear of the drive belt. In this case, the fastening screw of the motor base can be loosened, and the motor can be rotated in the opposite direction of the belt shaft to tighten the transmission belt, and then the fastening screw of the base can be tightened.

ABOUT  SPRING ZONE  CASE  NEWS  CONTACT

Tel: +86-752-2298683/18026593790(General manager);Email: 879089672@qq.com;Address:Luokeng Group, Xiaojinkou, Huicheng, Huizhou City, Guangdong Province

搜索
Search

Copyright © 2019 Yangsheng (Haosheng) Spring Products Co., Ltd. | 粤ICP备19042760号 | Powered by www.300.cn